Error 600: An operation is pending.
Error 601: The port is invalid.
Error 602: The port is already open.
Error 603: Caller's buffer is too small
Error 604: Wrong information specified.
Error 605: Cannot set port information.
Error 606: The port is not connected.
Error 607: The event is invalid.
Error 608: The device does not exist.
Error 609: The device type does not exist.
Error 610: The buffer is invalid.
Error 611: The route is not available.
Error 612: The route is not allocated.
Error 613: Invalid compression specified.
Error 614: Out of buffers.
Error 615: The port was not found.
Error 616: An asynchronous request is pending.
Error 617: The port or device is already disconnecting.
Error 618: The port is not open.
Error 619: The port is disconnected.
Error 620: There are no endpoints.
Error 621: Cannot open the phone book file.
Error 622: Cannot load the phone book file.
Error 623: Cannot find the phone book entry.
Error 624: Cannot write the phone book file.
Error 625: Invalid information found in the phone book.
Error 626: Cannot load a string.
Error 627: Cannot find key.
Error 628: The port was disconnected.
Error 629: The port was disconnected by the remote machine.
Error 630: The port was disconnected due to hardware failure.
Error 631: The port was disconnected by the user.
Error 632: The structure size is incorrect.
Error 633: The port is already in use or is not configured for Remote Access dialout.
Error 634: Cannot register your computer on the remote network.
Error 635: Unknown error.
Error 636: The wrong device is attached to the port.
Error 637: The string could not be converted.
Error 638: The request has timed out.
Error 639: No asynchronous net available.
Error 640: A NetBIOS error has occurred.
Error 641: The server cannot allocate NetBIOS resources needed to support the client.
Error 642: One of your NetBIOS names is already registered on the remote network.
Error 643: A network adapter at the server failed.
Error 644: You will not receive network message popups.
Error 645: Internal authentication error.
Error 646: The account is not permitted to log on at this time of day.
Error 647: The account is disabled.
Error 648: The password has expired.
Error 649: The account does not have Remote Access permission.
Error 650: The Remote Access server is not responding.
Error 651: Your modem (or other connecting device) has reported an error.
Error 652: Unrecognized response from the device.
Error 653: A macro required by the device was not found in the device .INF file section.
Error 654: A command or response in the device .INF file section refers to an undefined macro
Error 655: The macro was not found in the device .INF file section.
Error 656: The macro in the device .INF file section contains an undefined macro
Error 657: The device .INF file could not be opened.
Error 658: The device name in the device .INF or media .INI file is too long.
Error 659: The media .INI file refers to an unknown device name.
Error 660: The device .INF file contains no responses for the command.
Error 661: The device .INF file is missing a command.
Error 662: Attempted to set a macro not listed in device .INF file section.
Error 663: The media .INI file refers to an unknown device type.
Error 664: Cannot allocate memory.
Error 665: The port is not configured for Remote Access.
Error 666: Your modem (or other connecting device) is not functioning.
Error 667: Cannot read the media .INI file.
Error 668: The connection dropped.
Error 669: The usage parameter in the media .INI file is invalid.
Error 670: Cannot read the section name from the media .INI file.
Error 671: Cannot read the device type from the media .INI file.
Error 672: Cannot read the device name from the media .INI file.
Error 673: Cannot read the usage from the media .INI file.
Error 674: Cannot read the maximum connection BPS rate from the media .INI file.
Error 675: Cannot read the maximum carrier BPS rate from the media .INI file.
Error 676: The line is busy.
Error 677: A person answered instead of a modem.
Error 678: There is no answer.
Error 679: Cannot detect carrier.
Error 680: There is no dial tone.
Error 681: General error reported by device.
Error 682: ERROR WRITING SECTIONNAME
Error 683: ERROR WRITING DEVICETYPE
Error 684: ERROR WRITING DEVICENAME
Error 685: ERROR WRITING MAXCONNECTBPS
Error 686: ERROR WRITING MAXCARRIERBPS
Error 687: ERROR WRITING USAGE
Error 688: ERROR WRITING DEFAULTOFF
Error 689: ERROR READING DEFAULTOFF
Error 690: ERROR EMPTY INI FILE
Error 691: Access denied because username and/or password is invalid on the domain
Error 692: Hardware failure in port or attached device.
Error 693: ERROR NOT BINARY MACRO
Error 694: ERROR DCB NOT FOUND
Error 695: ERROR STATE MACHINES NOT STARTED
Error 696: ERROR STATE MACHINES ALREADY STARTED
Error 697: ERROR PARTIAL RESPONSE LOOPING
Error 698: A response keyname in the device .INF file is not in the expected format.
Error 699: The device response caused buffer overflow.
Error 700: The expanded command in the device .INF file is too long.
Error 701: The device moved to a BPS rate not supported by the COM driver.
Error 702: Device response received when none expected.
Error 703: ERROR INTERACTIVE MODE
Error 704: ERROR BAD CALLBACK NUMBER
Error 705: ERROR INVALID AUTH STATE
Error 706: ERROR WRITING INITBPS
Error 707: X.25 diagnostic indication.
Error 708: The account has expired.
Error 709: Error changing password on domain.
Error 710: Serial overrun errors were detected while communicating with your modem.
Error 711: RasMan initialization failure. Check the event log.
Error 712: Biplex port is initializing. Wait a few seconds and redial.
Error 713: No active ISDN lines are available.
Error 714: Not enough ISDN channels are available to make the call.
Error 715: Too many errors occurred because of poor phone line quality.
Error 716: The Remote Access IP configuration is unusable.
Error 717: No IP addresses are available in the static pool of Remote Access IP addresses.
Error 718: PPP timeout.
Error 719: PPP terminated by remote machine.
Error 720: No PPP control protocols configured
Error 721: Remote PPP peer is not responding.
Error 722: The PPP packet is invalid.
Error 723: The phone number, including prefix and suffix, is too long.
Error 724: The IPX protocol cannot dial-out on the port because the computer is an IPX router.
Error 725: The IPX protocol cannot dial-in on the port because the IPX router is not installed.
Error 726: The IPX protocol cannot be used for dial-out on more than one port at a time.
Error 727: Cannot access TCPCFG.DLL.
Error 728: Cannot find an IP adapter bound to Remote Access.
Error 729: SLIP cannot be used unless the IP protocol is installed.
Error 730: Computer registration is not complete.
Error 731: The protocol is not configured.
Error 732: The PPP negotiation is not converging.
Error 733: The PPP control protocol for this network protocol is not available on the server.
Error 734: The PPP link control protocol terminated.
Error 735: The requested address was rejected by the server.
Error 736: The remote computer terminated the control protocol.
Error 737: Loopback detected.
Error 738: The server would not assign an address
Error 739: The remote server cannot use the Windows NT encrypted password.
Error 740: The TAPI devices configured for Remote Access failed to initialize or were not installed correctly.
Error 741: The local computer does not support encryption.
Error 742: The remote server does not support encryption.
Error 743: The remote server requires encryption.
Error 744: Cannot use the IPX net number assigned by the remote server. Check the event log.
Error 745: An essential file is missing. Re-install Dial Up Networking.
Error 752: A syntax error was encountered while processing a script.
|